iPECS UCP600 - Page 267

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
253
Table 4.4.8.1-1 SIP Common Attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
SIP Multi-home
2nd IP UDP Port
Multi-home 2nd IP UDP Port is a UDP port used with Secondary
IP. UDP port(Secondary IP: UDP Port) will be opened.
Port
SIP Multi-home
2nd IP TCP Port
Multi-home 2nd IP TCP Port is TCP port used with Secondary IP.
TCP port(Secondary IP: TCP Port) will be opened.
Port
SIP Multi-home
2nd IP TLS Port
Multi-home 2nd IP TLS Port is a TLS port used with Secondary
IP. TLS port(Secondary IP: UDP Port)will be opened.
Port
System IPV6
Usage
Usage of IPV6 Address in SIP signaling
No,
Yes
No
System IPV6
Address
IPV6 address used for System - User can set Unicast IP or set
based on SLAAC Info.
System IPV6
Router
IPV6 Router used for System - User can set Router IP or set
based on SLAAC Info.
System IPV6 Net
Prefix
IPV6 Prefix used for System - User can set Prefix or set based on
SLAAC Info.
64