iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
262
Table 4.4.8.3-1 SIP CO ATTRIBUTES
The “Display” field of the “From” header can be configured to use
the below:
System Rule:
- a. From ID = Extension, display Contact Display Name
from PGM 126, otherwise display Station Name from PGM
111 or blank.
- b. From ID = Original CLI, display the Name received by
the system for the original call.
- c. From ID = Fixed Table display Contact Display Name
from PGM 126 or blank.
Original CLI: the CLI received by the system for the original
incoming call.
The Id in the “P-Asserted ID” header of SIP messages employ the
forwarding Station, the original CLI, or a fixed User ID
Extension: the Extension SIP User ID or Extension
Outgoing CLI as assigned for the From ID under ID
Individuality.
Original CLI: the CLI received by the system for the original
incoming call
Fixed Table: the SIP User ID from the SIP UID Fixed Table
Index attribute is assigned below.
The “Display” field of the “P-Asserted Id” header can be
configured to use the below:
System Rule:
- a. P-Asserted ID = Extension, display Contact Display
Name from PGM 126, otherwise display Station Name
from PGM 111 or blank.
- b. P-Asserted ID = Original CLI, display the Name
received by the system for the original call.
- c. P-Asserted ID = Fixed Table display Contact Display
Name from PGM 126 or blank.
Original CLI: the CLI received by the system for the original
incoming call.
The Id in the “Remote Party ID” header of SIP messages employs
the forwarding station, the original CLI, or a fixed User ID.
Extension: the Extension SIP User ID or Extension
Outgoing CLI as assigned for the From ID under ID
Individuality.
Original CLI: the CLI received by the system for the original
incoming call.
Fixed Table: the SIP User Id from the SIP UID Fixed Table
Index attribute assigned below.