iPECS UCP600 - Page 280

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
266
Table 4.4.8.3-1 SIP CO ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Global: include
phone-context
If the ‘Numbering Format’ is Global and the ‘To Field Method’ is
Telephony, the ‘phone context can be added below.
user dials ‘0011428701234’ from Country code 82
The resulting “To” field URI is,
tel:+0011428701234@[Domain];phone-context=+82
Yes
No
No
Add ‘+’ in
Outgoing Call
Add "+" in front of dialed number when it is YES
Yes
No
No
Specific Formatting by Conversion (example)
From 4 digits
To 6 digits
User Dial
Result
0
+82
0314504639
+82314504639
00
+
0082314504639
+82314504639
1588
1588
15886724
15886724
031
0314504639
4504639
SRTP Setting
SRTP Usage
When implemented by the carrier, the system can encrypt media
(RTP) packets employing SRTP (Secure Real-Time Transport
Protocol). But VoIP Virtual switching channel does not support
SRTP.
OFF
ON
OFF
1st CRYPTO
The first priority Crypt method for SRTP.
None
 ARIA_CM_192_HMAC_SHA1_80
 AES_CM_128_HMAC_SHA1_80
 ARIA_CM_128_HMAC_SHA1_80
 AES_CM_192_HMAC_SHA1_80
 ARIA_CM_256_HMAC_SHA1_80
 AES_CM_256_HMAC_SHA1_80
Refer to
description
None
2nd CRYPTO
The second priority Crypt method for SRTP.
None
 ARIA_CM_192_HMAC_SHA1_80
 AES_CM_128_HMAC_SHA1_80
 ARIA_CM_128_HMAC_SHA1_80
 AES_CM_192_HMAC_SHA1_80
 ARIA_CM_256_HMAC_SHA1_80
 AES_CM_256_HMAC_SHA1_80
Refer to
description
None
Caller/Called ID
ID Option
Caller ID
Selection
For display and ICLID call routing, iPECS employ this header as
the “Caller ID.”
P-Asserted-ID, Remote-Party-D, From ID
Refer to
description
P-Asserted-
ID
Display Caller
Name(Though
Id is
Anonymous)
Even though the User ID is Anonymous, the system can display
the SIP “From” header “Display Name” field for the call.
No
Yes
No