iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
300
Table 4.4.9.9-1 STATION/CO LINE COS TOLL RESTRICTIONS
Only Local Call(LD
code/counter) and
Table C
Exception Table A
governs the dialing
Exception Table A
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Exception Table B
governs the dialing
Exception Table B
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Exception Table A
& B governs the
dialing
Exception Table A
governs the dialing
Exception Table B
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Local Call only (LD
Code, “1” or “0”)
and Table C
Local Call only (LD
Code, “1” or “0”)
and Table C
Local Call only (LD
Code, “1” or “0”)
and Table C
Only Local Call(LD
code/counter) and
Table C
Only Local Call (LD
code/counter) and
Table C
Only Local Call (LD
code/counter) and
Table C
Only Local Call (LD
code/counter) and
Table C
Only Local Call(LD
code/counter) and
Table C
Exception Table D
governs the dialing
Exception Table D
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Exception Table E
governs the dialing
Exception Table E
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Exception Table D
& E governs the
dialing
Exception Table D
& E governs the
dialing
Only Local Call(LD
code/counter) and
Table C
Exception Table A
& B and D & E
governs the dialing
Exception Table A
& B and D & E
governs the dialing
Only Local Call(LD
code/counter) and
Table C
Table 4.4.9.9-2 STATION CLASS-OF-SERVICE
No restrictions are placed on dialing from the station.
The assignments in Exception Table A are monitored for allowing and deny numbers.
The assignments in Exception Table B are monitored for allowing and deny numbers.
The assignments in both Exception Tables A & B are monitored for allowing and deny
numbers.
The leading digit dialed cannot be a Long-Distance code, default “0”, and further
denied/allowed based on Exception Table C.