iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
117
4.3.3.9 Preset Call Forward – PGM 120
This assignment allows an external or internal call to initially ring at a station and forward to a pre-determined
destination. Preset Call Forward can be assigned separately for internal and external calls forwarding for all
calls (Unconditional), Internal Busy, No-Answer or DND, or External Busy, No-Answer or DND. Calls can be
set as Preset Forward to a Station, Hunt group, System Speed dial for Off-net, or Station ICR. For the
“Transfer to Mail-Box,” enter the Station Group number of the Voice Mail group (external VM, VSF, or Feature
Server Voice Mail group). This will permit other iPECS IP Phone and LDP users to transfer a call directly to the
desired user‘s Voice Mail-Box.
CALL FWD PRESET
ENTER STA RANGE
Press the [PGM] button and dial 120.
100 – 110 STA PRES FWD
CONDITION CHOICE (F1 –F8)
Use the dial-pad to enter a station range (Ex. 100~110). For a single
station, enter the same number twice.
F1:S F2:H F3:SPD F4:ICR
UNCONDITION : ….
Press Flex Button for the desired type of forwarding:
- 1. Unconditional
- 2. Internal Busy
- 3. Internal No Answer
- 4. External Busy
- 5. External No Answer
- 6. Transfer to Mailbox (destination must be the VM Group).
- 7. Internal DND
- 8. External DND
ENTER FWD STA NO.
UNCONDITION : STA ….
Select Flex button for the Destination type:
- 1. Station
- 2. Hunt Group
- 3. System Speed Bin for Off-net
- 4. Station ICR
Use the dial pad to enter the value associated with the selected type:
- For Station & Net Station, enter station number,
- For Hunt Group, enter Station Group Number,
- For System Speed Bin for Off-Net, enter Speed bin number.
Press the [Save] button to store the data entry.
To Next Page
Loading...
