iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
116
4.3.3.8 PTT (Push-To-Talk) Group Access – PGM 119
Each iPECS Phone is assigned to receive PTT announcements from any combination of the nine PTT groups.
Note remote stations and stations not assigned to a group will not receive PTT page announcements including
All PTT group page.
As a default, all stations except remote stations are assigned to group 1.
PTT GROUP ACCESS
ENTER STA NUMBER
Press the [PGM] button and dial 119.
100-110 PTT GRP ACC
PRESS FLEX_KEY (01-10)
Use the dial-pad to enter a station range (Ex. 100~110). For a single
station, enter the same number twice.
The first 10 Flex button LEDs indicate assigned zones. Press the
desired Flex button to toggle Push-To-Talk group assignments,
- LED On: station receives announcement
- LED Off: station does not receive PTT announcement
Flex button 10 assigns group 0, all groups.
Press the [Save] button to store the PTT group data.
To Next Page
Loading...
