iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
119
4.3.3.11 Station IP Attributes – PGM 122
Stations are allowed access to the systems H.323 VoIP resources based on the Station IP Attributes. Refer to
Table 3.3.3.11-1 for a description of the attributes and the inputs available.
STATION IP ATTRIBUTE
ENTER STA RANGE
Press the [PGM] button and dial 122.
100-110 STA IP ATT
PRESS FLEX KEY (1)
Use the dial-pad to enter a station range (Ex. 100~110). For a single station,
enter the same number twice.
Press the desired Flex button; refer to Table 3.3.3.11-1.
Use the dial-pad to enter desired data for the Station IP Attribute. Refer to
Table 3.3.3.11-1.
Press the [Save] button to store the data entry.
Table 3.3.3.11-1 STATION IP ATTRIBUTES (PGM 122)
100-110 DTR IP CALL
(1:EN/0:DIS) : ENABLE
Enables station to access an IP channel
directly by dialing the IP Group access
code to place H.323 or SIP VoIP calls.
To Next Page
Loading...
