iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
120
4.3.3.12 Station Timers – PGM 123
Certain timers can be assigned on a station basis. Available timers, descriptions, and valid inputs are given in
Table 3.3.3.12-1.
STATION TIMERS
ENTER STA RANGE
Press the [PGM] button and dial 123.
100-110 STATION RANGE
PRESS FLEX KEY (1-2)
Use the dial-pad to enter a station range (Ex. 100~110). For a single
station, enter the same number twice.
Press the desired Flex button.
Use the dial-pad to enter desired data for the Station IP Attribute. Refer to
Table 3.3.3.12-1.
Press the [Save] button to store the data entry.
Table 3.3.3.12-1 STATION TIMERS (PGM 123)
STA FWD NO ANS TMR (sec)
(000-600) : 000
This timer determines the duration the station
will ring prior to Ring-No-Answer Forward.
This setting affects both manual and Preset
Call Forward and overrides the System Ring
No Answer timer PGM 181-button 1.
CUT OFF (Min)
(00-99) : 00
Allowed length of CO/IP calls when the
station is assigned Call Time restriction in
Station Attributes II, PGM 112, button 3
To Next Page
Loading...
