iPECS UCP600 - Page 567

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
126
Table 3.3.3.16-1 CCR DESTINATIONS (PGM 128)
TYPE
DESCRIPTION
1
Route to a Station
2
Route to a Hunt Group
3
Route with System Speed Dial
4
Route as PBX Transfer with System Speed Dial (Flash then dial speed dial digits)
5
Route to VSF Announcement
6
Route to VSF Announcement and disconnect
7
Route to Networked Station
8
Conference Room
9
Internal Page
10
External page
11
All Call Page
12
Route to voice mail (Hunt group/station number)
13
Company Directory
14
Record VM Greeting
15
Room Type Conf Group Join
(Value: system conference group number)
(Value Range: eMG80/100(0 or 100~139), eMG800/UCP(0 or 100~259)
4.3.3.17 LSS Label Edit – PGM 129
The LIP-8012 LSS 12 button DSS Console incorporates an LCD used to label the function of each button. The
label, which can be up to 12 characters, is assigned in this program.
PROCEDURE
LSS LABEL EDIT
ENTER STA NUMBER
Press the [PGM] button and dial 129.
STA 100 LSS LABEL
ENTER LSS IDX(1-4)
Use the dial-pad to enter the station number associated with the console
(Ex. 100).
STA 100 LSS 1
ENTER BTN NO (01 – 12)
Consoles are indexed, allowing multiple consoles to be associated with a
station. Use the dial-pad to enter the index of the LSS console (1 ~ 4).
STA 100 LSS 1 BTN 1
LABEL IS EMPTY
Use the dial-pad to enter the desired LSS console button number (1 ~ 12).
Edit the label referring to Table 2.1.2-1 Alpha-numeric Entry Chart.
Press the [Save] button to store the data entry.