iPECS UCP600 - Page 580

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
139
Table 3.3.5.2-3 CO/IP ATTRIBUTES III (PGM 143)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
DEFAULT
4
01-02 TYPE OF NO(0-4)
NATIONAL (2)
This parameter defines the “Type of Number Plan”
provided in Calling Party Information Element of the
ISDN call SETUP message for outgoing calls on the
ISDN Line.
0: UNKNOWN, 1: INTERNATIONAL
2: NATIONAL, 3: Unused, 4: SUBSCRIBER
2
5
01-02 DID REMOVE NO
(00-99) : 00
When a DID call is received on an ISDN Line, this entry
determines the number of digits that will be removed
starting with the first received digit.
00
6
02 TEI TYPE
(1:AUTO/0:FIX) : AUTO
The TEI (Terminal Endpoint Identifier) is a unique
identifier for each device attached to the ISDN line.
When the system shares an ISDN connection with other
devices, the TEI should be automatic to ensure no
conflict with other attached devices.
When the ISDN connection is not shared, the Fixed
identifier option should be employed.
AUTO
7
02 ISDN-SS CD/CR
(1:EN/0:DIS) : DISABLE
Permits user access to ISDN Supplementary Call
Deflection or Call Re-route Service.
(Except USA version)
Disable
8
02 ISDN 1 DGT RM
(1:ON/0:OFF) : OFF
Select one digit removal mode in ISDN Called Digits (for
Italy).
OFF
9
001-002 AOC TYPE (0-5)
NO SERVICE (0)
When assigned, the system will analyze the Advice of
Charge information in the Facility Message according to
the ETSI specifications with appropriate regional
protocol support.
No
Service
10
001-002 ISDN LINE TYPE
(1:U/0:A): U_LAW
The system will encode voice using the A-law or u-law
PCM format and should be set to match the ISDN Back
bone type.
u-Law
11
01-02 CALLING SUBADDR
(1:ON/0:OFF) : OFF
The user’s station number may be included in the ISDN
call SETUP message Sub-address field for outgoing
calls.
OFF
12
01-02 IN PREFIX INS
(1:ON/0:OFF) : OFF
Regional ISDN providers may use the Local Area Prefix
code for special services. In cases where the code is not
provided in the incoming call SETUP message, the
system can insert the Local Prefix and Area code in
SMDR, LNR, displays, etc.
OFF
13
01-02 OUT PREFIX INS
(1:ON/0:OFF) : ON
Regional ISDN providers may use the Local Area Prefix
code for special services. The system can insert the
Local Prefix in the outgoing call SETUP message.
ON