iPECS UCP600 - Page 599

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
158
Table 3.3.6.1-1 SYSTEM ATTRIBUTES I (PGM 160)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
16
AUTH RETRY COUNT
(1-9) : 3
If CO’s have “CO/IP group Authorization”
set to ON inPGM141, 8th or the
Stationshave “Station Account” set to
ONin PGM112, 19th, then a valid
authorization code must be entered to
make an external CO call.
When the user fails to enter a valid
Authorization code in the number of
attempts assigned in this field, the station
is disconnected, or the Station COSis
changed to COS 7.
If the COS 7 WHEN AUTH FAIL, PGM
161, 17th is on, then the station COS is
changed to COS7. Otherwise, the station
is disconnected. When the station COS is
changed to COS 7, the user must employ
COS Restorein Station User PGM 2 to
return the station to the normal COS.
1 ~ 9
3
17
CONFROOM CO TELNUMBER
CO TEL:
ISDN DID number an external party must
dial to enter a Conference room. UCS
Client must pre-establish the Conf Room.
8 digits
18
MPB DIFFSERV
TAG(00-63): 04
MPB Diff-Serv pre-tag value.
00-63
04
19
UPGRADE MODE
(1:FTP/0:TFTP): FTP
Upgrade transfer mode fromMPB to IP
devices.
1: FTP
0: TFTP
FTP
20
TRANSFER TONE
(1:RBT/0:MOH): RBT
Ring BackTone or Music On Hold will be
played to the CO Line when a CO call is
transferred to a busy extension.
0: MOH
1: RBT
RBT
21
CONF WARN TONE
(1:ON/0:OFF) : ON
As new members join a conference room,
the system provides a warning tone to
conference members.
0: OFF
1: ON
ON
22
TLS for WEB
(1:ON/0:OFF) : OFF
Enables Transport LayerSecurity TLS for
Web access.
0: OFF
1: ON
OFF
23
DUMMY DIAL TONE
(1:ON/0:OFF) : OFF
When a CO/IP line does not provide a dial
tone, the system can provide a dummy
dial tone to the user.
0: OFF
1: ON
OFF
24
SYSTEM 2 ADDED ATTR
PRESS FLEX KEY (01-23)
Select button24 to access added
attributes 1~23.
FLEX 1 ~
FLEX 23