iPECS UCP600 - Page 614

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
173
Table 3.3.6.5-1 MULTI-CAST RTP/RTCP PORTS — (PGM 165)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
55
M-CAST RTP SLT MOH 1
8208 (8209)
RTP and RTCP ports for SLT
MOH 1 use.
0000-9999
8208
(8209)
56
M-CAST RTP SLT MOH 2
8210 (8211)
RTP and RTCP ports for SLT
MOH 2 use.
0000-9999
8210
(8211)
57
M-CAST RTP SLT MOH 3
8212 (8213)
RTP and RTCP ports for SLT
MOH 3 use.
0000-9999
8212
(8213)
58
M-CAST RTP SLT MOH 4
8214 (8215)
RTP and RTCP ports for SLT
MOH 4 use.
0000-9999
8214
(8215)
59
M-CAST RTP SLT MOH 5
8216 (8217)
RTP and RTCP ports for SLT
MOH 5 use.
0000-9999
8216
(8217)
60
M-CAST RTP VSF MOH 2
8218 (8219)
RTP and RTCP ports for
VSF/VMIB MOH 2 use.
0000-9999
8218
(8219)
61
M-CAST RTP VSF MOH 3
8220 (8221)
RTP and RTCP ports for
VSF/VMIB MOH 3 use.
0000-9999
8220
(8221)
62~83
M-CAST RTP VSF MOH 4-30
8222~8328 (8221~8329)
RTP and RTCP ports for
VSF/VMIB MOH 4 ~ 30 use.
0000-9999
8222~8328
(8221~8329)
4.3.6.6 DISA COS – PGM 166
A DISA user is subject to the dialing restrictions assigned in the DISA Class-of-Service (COS). The restrictions
applied are the same as with the corresponding Station COS levels 1~11 and interact with the CO COS in the
same manner.
Assignments for DISA COS are made for the Day, Timed, and Night mode of system operation. The default for
all three DISA COS modes is 1, with no restrictions.
PROCEDURE
DISA COS (1 – 11)
DAY: 07 NIGHT: 07 TIMED:07
Press the [PGM] button and dial 166.
Select the desired button;
- Button 1: Day mode COS
- Button 2: Night mode COS
- Button 3: Timed mode COS
Use the dial-pad to enter desired DISA COS (1~11).
Press the [Save] button to store the DISA COS data entry.