iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
174
4.3.6.7 DID/DISA Destination – PGM 167
When a DID line, or DISA user dials an invalid/vacant or busy station number, the caller will be sent to the
assigned destination that is selected according to the CO tenancy group of the DID/DISA line.
The destination is separately defined for invalid, busy, no answer, and DND conditions and can be defined as
the Attendant, busy tone, Station Group, or VSF System Announcement.
Note that for calls on a DID line to a busy station, Call Wait can be assigned. Refer to PGM 113, Station
Attributes III, button 9.
Also, for DID calls only, announcements (prompts) can be sent from the VSF to the caller for various
conditions, busy, error, DND, No Answer, reroute busy, reroute error, reroute no answer, or Attendant Transfer.
DID/DISA DESTINATION
ENTER ICM GROUP (00-15)
Press the [PGM] button and dial 167.
Select ICM tenancy group (eMG80/100:0~15 / eMG800:0~32)
DID/DISA DESTINATION :0
PRESS FLEXKEY (1-9)
Press the [PGM] button, dial 167, and press the Flexible button (Ex.1).
BUSY DESTINATION
TONE (F1-F4)
Select the desired Flex button,
- Button 1: Busy Destination (F1-F4)
- Button 2: Error Destination (F1-F4)
- Button 3: No Answer Destination (F1-F4)
- Button 4: VSF Prompt Usage (F1-F5)
- Button 5: Reroute Busy Destination (F1-F3)
- Button 6: Reroute Error Destination (F1-F3)
- Button 7: Reroute No answer Destination (F1-F3)
- Button 8: DND destination (F1-F3)
- Button 9: Reroute NET CO BUSY Destination (F1-F3)
For Flex button 1~3 or 1~4, use the dial-pad to enter 1: ON or 0: OFF for
the following VSF prompts.
- 1: Tone
- 2: Attendant
- 3: Station Group number
- 4: VSF Announcement
For Flex button 4, select Flex button 1~5 for the desired VSF prompt and
use the dial-pad to enter 1: ON or 0: OFF:
- Button 1: Busy Prompt
- Button 2: Error Prompt
- Button 3: DND Prompt
- Button 4: No Answer Prompt
- Button 5: Attendant Transfer Prompt
Press the [Save] button to store the destination data entry.
To Next Page
Loading...
