iPECS UCP600 - Page 619

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
178
Table 3.3.6.10-1 BUTTON LED FLASH RATE (PGM 170)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
9
COL IN OFFNET CFW
FLASH 240 IPM FLUTTER
CO button incoming off-net call
forward flashing rate.
00-14
FLASH
240 IPM
FLUTTER(6)
10
COL DISA IND
FLASH 240 IPM
CO button DISA indication flashing
rate.
00-14
FLASH
240 IPM(5)
11
COL SUPP CW
FLASH 240 IPM FLUTTER
CO button supplementary call
waiting flashing rate.
00-14
FLASH
240 IPM
FLUTTER(6)
12
COL SUPP HOLD
FLASH 480 IPM
CO button supplementary hold
flashing rate.
00-14
FLASH
480 IPM(7)
13
DSS CO RING
FLASH 30 IPM
DSS button CO ring flashing rate.
00-14
FLASH 30
IPM (2)
14
DSS ALL RING
FLASH 60 IPM
DSS button ICM ALL ring flashing
rate.
00-14
FLASH 60
IPM (3)
15
DSS ASC RING
FLASH 120 IPM
DSS button ICM rings associate
device flashing rate.
00-14
FLASH
120 IPM(10)
16
DSS IN DND
FLASH 60 IPM
DSS button station in DND.
00-14
FLASH 60
IPM (3)
17
DSS LOCK OUT
FLASH 480 IPM FLUTTER
DSS button station in the lockout.
00-14
FLASH
480 IPM
FLUTTER(8)
18
DSS PRESEL MSG
FLASH 30 IPM
DSS button station in the pre-
selected message.
00-14
FLASH 30
IPM (2)
19
DSS ICM HOLD
FLASH 60 IPM
DSS button station on ICM hold.
00-14
FLASH 60
IPM (3)
20
DSS OTHER
FLASH 120 IPM
DSS button station in other states.
00-14
FLASH
120 IPM(10)
21
UCD QUE RING 2
FLASH 60 IPM
CIQ Threshold # 1.
00-14
FLASH 60
IPM (3)