iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
206
4.3.7 STATION GROUP DATA – PGM 190 & 192
Stations can be grouped so that incoming calls will search (hunt) for an idle station in the group. The system
allows the assignment of three hunt processes, Circular, Terminal, and UCD. In addition, there are eight (8)
functional groups available: ACD (Automatic Call Distribution) based on UCD hunt, Ring, Call Pick-Up,
External Voice Mail (SLT connected), VSF-Voice Mail, iPECS Feature Server Voice Mail, Network Voice Mail,
and UCS Groups. Certain types of groups can incorporate announcements, which are given to the calling
party. The system’s VMIU or VMIB can store up to seventy (70) announcements for use with Station Groups.
Note that a station can belong to multiple groups if the groups are all of the same types. Also, note that when a
station group is assigned to a group type (Station, ACD, VM, FS VM, VSF-VM, Net VM, UCS, and Ring), the
group attributes are initialized to the default values.
4.3.7.1 Station Group Assignment -PGM 190
Under Station Group Assignments, the type, members, and Pick-Up attribute are assigned to the Station
Group. Note for the Net VM group. The network number must be assigned as the Net VM group member
station. Refer to Table 3.3.7.1-1 for a description of the functions, the LCD displays, and data entries required.
Use the dial pad to enter the desired Station Group data. Note for group
members, enter a station or station range. For an individual station, press
the desired Flex button for the station's position in the group and dial the
station number. For a range, enter the first and last station numbers in the
range.
This entry defines the type of station group.
The range is below.
00: Not Assign, 01: Circular, 02: Terminal
03: UCD/ACD, 04: RING, 05: Ext VM
06: PICK-UP, 07: VSF-VM, 08: UMS
09: NET-VM, 10:UCS Server
To Next Page
Loading...
