iPECS UCP600 - Page 661

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
220
Table 3.3.7.2-6 STATION GROUP ATTRIBUTES — VSF-VM GROUP (PGM 191)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
VSF-VM409RETENSION(1d)
(00 – 99) : 00
When voice messages are stored in the
VSF, the system will maintain (store) the
message for the maximum number of days
set in this program (1 to 99 days). (Not
used currently)
00-99
(day)
00
2
VSF-VM 409DIAL TIME (1s)
(00 – 99) : 15
This timer determines the inter-digit time
employed during a VSF-VM session. If this
timer expires while the VSF-VM is awaiting
user input, the system will assume the
remote party has disconnected and will
return the channel to idle.
00-99
(seconds)
15
3
VSF-VM GROUP NAME
……………………………….
A VSF-VM group name can be designated.
20
character
….
Table 3.3.7.2-7 STATION GROUP ATTRIBUTES — UMS GROUP (PGM 191)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
UMS 410 ANNC 1 TMR(1s)
(000 - 999) : 015
If all stations in the group are busy when a
call is offered, the call may continue to wait
(queue) for an available station.
If the queue period exceeds this 1st
AnnouncementTimer, the call may be sent
to a VSF announcement. If the timer is set
to 000, the call will receive the first
announcement, in full, prior to the hunt
process (guaranteed announcement).
000~999
seconds
015
2
UMS 410 ANNC 2 TMR(1s)
(000 - 999) : 000
After the 1st announcement, the 2nd ANNC
TMR is activated. At expiration, if the call
remains queued to the group, the call is
sent to the assigned 2nd VSF
announcement.
000-999
seconds
000
3
UMS 410 ANNC1 LOC
VSF ANNC .. (01 – 70)
The Station Group can be assigned an
announcement, which is played if the call
remains queued beyond the ANNC 1 TMR
duration. The announcement location is the
VSF ANNC1 number. An entry of 00
indicates no announcement. Including ‘#’ at
the end of an entry instructs the system to
disconnect after the announcement.
01~70
00: none