iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
235
DMT TABLE
ENTER DMT BIN (00-99)
Press the [PGM] button, dial 222, and enter the DMT bin number
(Ex.55).
55 A: . . . . . . . . . . . . . . . . . . . .
RP01 NR00 AP01 CG01 AD ..
Using the dial pad enter the desired Digit Modification Table index.
Press the Flex button (1~6) for the desired Table entry. Refer to Table
3.3.9.1.3-1.
Use the dial pad to enter the desired Digit Modification Table data.
Refer to Table 3.3.9.1.3-1.
Press the [Save] button to store the data entry.
Table 3.3.9.1.3-1 LCR DIGIT MODIFICATION (PGM 222)
DMT 55 ADDED DGT
. . . . . . . . . . . . . . . . . . . . . . . . . .
This entry defines the digit stream to insert
in the number after digits are removed.
Digits 0~9, ‛*,’ ‛#,’ and special characters:
[HOLD]: timed Pause
[DND]: Dial tone detect
[FLASH]: Billing station number
DMT 55 REMOVAL POSITION
(01-12) : 01
This entry defines the digit's position
where removal is to begin, starting with the
1st dialed digit (01).
DMT 55 NUM OF REMOVE
DIGITS (00-12) : 00
This entry defines the number of digits to
remove starting at the “Removal Position.”
DMT 55 ADD POSITION
(01-13) : 01
This entry defines the position in the
number (after digits are removed) where
the Add Digits are inserted.
DMT 55 CO/IP GROUP
(01-21) : 01
This entry defines the CO/IP Group that
the system will attempt to use for the call.
DMT 55 ALT INDEX
(00-99) : . .
This entry defines an Alternate Digit
Modification Table Index to use if no path
is available in the assigned CO/IP Group.
DMT 55 NET NUM PLAN BIN
(000-251) : . . .
This entry defines the Net Number Plan
Table bin that the system will attempt to
use for the transit outcall.
This is only used for TNET with CM. This
code will be sent to CM when the TNET
status is changed from Local survival
mode to bypass mode.
To Next Page
Loading...
