iPECS UCP600 - Page 677

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
236
4.3.9.1.4 LCR Table Initialize — PGM 223
The LCR Table Initialize allows global values to be assigned to the various Digit Modification Table entries. In
addition, the LCR Leading Digits and LCR Digit Modification Tables can be initialized, with no entries state.
PROCEDURE
INITIALIZE LCR DB
PRESS FLEX KEY (1-6)
Press the [PGM] button and dial 223.
Press the Flex button (1~6) for the desired Table entry. Refer to Table
3.3.9.1.4-1.
Use the dial pad to enter the desired LCR data. Refer to Table 3.3.9.1.4-1.
Press the [Save] button to store the data entry.
Table 3.3.9.1.4-1 LCR TABLE INITIALIZES (PGM 223)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
ENTER DMT INIT VAL(DAY1)
. . . . . .
This entry permits the global setting of
the Digit Modification Table Time Zone
1 to 3 indices for Day Zone 1.
00~99 3
DMT indices
2
ENTER DMT INIT VAL(DAY2)
. . . . . .
This entry permits the global setting of
the Digit Modification Table Time Zone
1 to 3 indices for Day Zone 2.
00~99 3
DMT indices
3
ENTER DMT INIT VAL(DAY3)
. . . . . .
This entry permits the global setting of
the Digit Modification Table Time Zone
1 to 3 indices for Day Zone 3.
00~99 3
DMT indices
4
ENTER CO GRP INIT VAL
. .
This entry permits the global setting of
the CO/IP Group to be used for LCR
calls.
01~21
5
ENTER ALT INDEX INIT VA
. .
This entry permits the global setting of
the Digit Modification Alternate Index.
00~99
6
INITIALIZE ALL LCR ?
Pressing [Save] will return the LCR
LDT and DMT tables to the default (no
entries) setting.