iPECS UCP600 - Page 88

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
74
Table 4.4.2.4-1 CLI Attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Answered By
Group Member
One of the members can answer the call to the same ring
group, such as call coverage, linked pair, etc. At that time, the
call log can set whether to leave the received call list or not by
selecting Answered or Do-Not-Log. But the call log is left in the
received call list on the phone even though setting Do-Not-Log.
 Answered: the call log is left in the received call list on
the same ring group phone.
 Do-Not-Log: the call log is left in the received call list only
on the phone except for other member phones.
Refer to
description
Answered
Coverage Call Log
This is an option about the log of coverage call of a slave
station. When gets a coverage ring for a master station, slave
station leaves or does not leave log according to conditions in
option. All, Except Answered By Other, Only Answered By
Me, None
Refer to
description
All
Internal Call Log
This option enables the call log to display 'Both (Incoming and
Outgoing)' or 'Incoming only' or 'None.'
 Both: Incoming and outgoing call
 Incoming only: Show Incoming call only.
 None: Don't leave the internal call as a call log.
Refer to
description
Both
Clear Missed Call
Log
When the missed call is left in a station, the LOG soft button is
indicated as LOG(M), and missed call icon is displayed.
When this option is ON, and missed call is left, if a user enters
call log list by pressing the LOG button and go out from the call
log list, then missed call indication(LOG(M) & missed call icon)
is deleted.
When this option is OFF, and missed call is left, if a user
enters call log list by pressing the LOG button and go out from
the call log list, then missed call indication(LOG(M) & missed
call icon) is not deleted. In this case, missed call log indication
is deleted after checking all missed calls.
OFF
ON
OFF
Page Call Log
This is an option about log for a receiving page call.
 None: do not leave log for receiving page
 All: go log for all kinds of receiving page
 Emergency(Including Urgency Level 0) Only: leave log
only for receiving an emergency page
Refer to
description
None
Busy/DND/VM Log
If it is On, the system call log is left when the call is delivered to
busy/DND/unconditional forward to the VM destination.
OFF
ON
OFF