Lexmark X862de - Page 211

Diagnostic information 2-111
7500-432, -632, and -832
Go Back
Previous
Next
9 Check the registration motor (forward or reverse) test.
Perform the registration motor test.
Open the ADF left cover assembly.
Remove the ADF rear cover. Go to “ADF rear cover
removal” on page 4-173.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch ADF registration drv mtr.
5. Touch Forward or reverse.
Does the ADF registration motor operate properly?
Go to step 11. Go to step 10.
10 Check the ADF registration motor for connection.
Is the above motor connected properly?
Replace the ADF
registration
motor.
Go to “ADF
registration
motor removal”
on page 4-209.
Replace the
connection.
11 Check the inverter solenoid assembly for operation.
Perform the inverter solenoid test.
Open the ADF left cover assembly.
Remove the ADF front cover assembly. Go to “ADF front
cover assembly removal” on page 4-174.
Close the ADF left cover assembly.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Scanner Motor Tests.
4. Touch Inverter solenoid.
Does the inverter solenoid assembly operate properly?
Go to step 13. Go to step 12.
12 Check the inverter solenoid assembly for connection.
Is the above motor connected properly?
Replace the
inverter solenoid
assembly.
Go to “Inverter
solenoid
assembly
removal” on
page 4-181.
Replace the
connection.
13 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
Replace the ADF
controller card
assembly.
Go to “ADF
controller card
assembly
removal” on
page 4-175.
Go to step 14.
14 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
Replace the RIP
card assembly.
Go to “RIP card
assembly
removal” on
page 4-130.
Problem solved.
Step Check Yes No