4-6 MFP Service Manual
7500-432, -632, and -832
Printer front door assembly removal
1. Open printer front door assembly (A).
2. Remove the front door support strap (B) securing the printer front door assembly (A) to the printer by
releasing the plastic hook.
3. With the front door support strap (B) disconnected, place the printer front door assembly (A) in the
lowermost position.
4. Slide the printer front door assembly (A) first to the right (as shown by arrow #1) to remove the printer front
door assembly (A) from the right hinge point.
5. Slide the printer front door assembly (A) to the left (as shown by arrow #2) to remove the printer front door
assembly (A) from the left hinge point.
6. Raise the printer front door assembly to its upright position, and remove it.
To Next Page
Loading...
