Lexmark X862de - Exit 2 Media Shift Gear Removal

Repair information 4-333
7500-432, -632, and -832
Go Back
Previous
Next
Exit 2 media shift gear removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-322.
2. Open the exit 2 unit assembly.
3. Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-325.
4. Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-327.
5. Move the roll assembly (A) fully to the right (front).
6. Lift the exit 2 media shift gear (B) upward to release it from the exit 2 unit assembly.
7. Release the hook on the exit 2 media shift gear (B) from the hole in the roll assembly (A).
8. Remove the exit 2 media shift gear (B).
A
B
A
HOOK
HOLE
FRONT
B
A