Lexmark X862de - 2000-Sheet Dual Input (TTM)-Feed Roll Removal

4-266 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—feed roll removal
1. Remove the media tray assembly.
2. Move the feed unit front guide (A) in the direction of the arrow.
3. Release the hook securing the feed roll (B) to the shaft (C).
4. Remove the feed roll (B).
Note: Do not touch the rubber surface of the feed roll (B).
Note: Before re-installing, do not touch the rubber surface of the feed roll (B).
Front
A
Hook
C
B