Lexmark X862de - 2000-Sheet Dual Input (TTM)-Tray 4 Lift Gear Assembly Removal

Repair information 4-279
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—tray 4 lift gear assembly removal
1. Remove the rear cover. See “2000-sheet dual input (TTM)—rear cover removal” on page 4-219.
2. Remove the controller card assembly. See “2000-sheet dual input (TTM)—2TM/TTM controller card
assembly removal” on page 4-281.
3. Release the two harnesses from the clamp of the tray 4 lift gear assembly (A).
4. Remove two screws securing the tray 4 lift gear assembly (A).
5. Remove the tray 4 lift gear assembly (A).
A
Clamps