Lexmark X862de - Error code messages

Diagnostic information 2-11
7500-432, -632, and -832
Go Back
Previous
Next
Error code messages
Error code or
message
Error contents Description/Action
200.00
Paper jam
Check area A
Sensor (registration) off
jam (too long)
The sensor (registration) is not turned off within the
specified time after the registration clutch is turned
on.
Go to “200.00 Sensor (registration) off jam (too
long)” on page 2-36.
200.01
Paper jam
Check area A
Sensor (registration) static
jam
Media remains on the sensor (registration).
Go to “200.01 Sensor (registration) static on
jam” on page 2-37.
201.00
Paper jam
Check area A
Sensor (fuser exit) on jam The sensor (fuser exit) is not turned on within the
specified time after the registration clutch is turned
on.
Go to “201.00 Sensor (fuser exit) on jam” on
page 2-38.
202.00
Paper jam
Check area A
Sensor (fuser exit) off jam The sensor (fuser exit) is not turned off within the
specified time after the sensor (fuser exit) is turned
on.
Go to “202.00 Sensor (fuser exit) off jam” on
page 2-39.
202.01
Paper jam
Check area A
Sensor (fuser exit) off (too
short) jam
The sensor (fuser exit) is turned off earlier than the
specified time after the sensor (fuser exit) is turned
on.
Go to “202.01 Sensor (fuser exit) off (too short)
jam” on page 2-40.
202.02
Paper jam
Check area A
Sensor (fuser exit) static jam Media remains on the sensor (fuser exit).
Go to “202.02 Sensor (fuser exit) static jam” on
page 2-41.
203.00
Paper jam
Check area A
Sensor (exit 2) on jam The sensor (exit 2) is not turned on within the
specified time after the sensor (fuser exit) is turned
on.
Go to “203.00 Sensor (exit 2) on jam” on
page 2-41.
203.01
Paper jam
Check areas
A, E
Sensor (exit 2) off jam The sensor (exit 2) is not turned off within the
specified time after the sensor (exit 2) is turned on.
Go to “203.01 Sensor (exit 2) off jam” on
page 2-43.
203.02
Paper jam
Check areas
A, E
Sensor (exit 2) is on in the
standard bin or simplex
finisher
The sensor (exit 2) was turned on when the media is
delivered to the exit 1 standard bin or simplex
finisher.
Go to “203.02 Sensor (exit 2) on jam in standard
bin or finisher” on page 2-45.
203.03
Paper jam
Check areas
A, E
Sensor (exit 2) static jam Media remains on the sensor (exit2).
Go to “203.03 Sensor (exit 2) static jam” on
page 2-46.