Lexmark X862de - 2000-Sheet Dual Input (TTM)-Tray Support Roll Removal

Repair information 4-221
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—tray support roll removal
1. Remove tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on
page 4-224.
2. Remove tray 4 assembly. See “2000-sheet dual input (TTM)—tray 4 assembly removal” on
page 4-223.
3. Remove the foot cover. See “2000-sheet dual input (TTM)—foot cover removal” on page 4-216.
4. Remove two screws securing the two brackets (A).
5. Remove the two e-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
6. Remove the two e-clips securing the tray support rolls (B) to the main frame.
7. Remove the shafts (D).
Front
B
D
A
E-ring