4-226 MFP Service Manual
7500-432, -632, and -832
2000-sheet dual input (TTM)—tray 3 rear cable assembly removal
1. Remove the left cover. See “2000-sheet dual input (TTM)—left cover removal” on page 4-218.
2. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on
page 4-224.
3. Remove the tray 3 front cover. See “2000-sheet dual input (TTM)—tray 3 front cover removal” on
page 4-225.
4. Remove the E-clip with a prying tool securing the front lift cable pulley (A) to the tray lift shaft assembly (B).
5. Gently move the tray lift shaft assembly (B) toward the rear of the tray and detach the rear bushing (C)
from the frame.
Note: Do not remove the front lift cable pulley (A) or the front lift cables will become detached.
6. Move the rear portion of the tray lift shaft assembly (B) away from the frame.
To Next Page
Loading...
