Lexmark X862de - Operator Panel Cover Assembly Removal

4-140 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Operator panel cover assembly removal
1. Remove the operator panel assembly. See “Operator panel assembly removal” on page 4-135.
2. Release the hooks accessible on the rear end to dislodge the operator panel side covers (A).
Note: Use a prying tool to release the hooks that are difficult to access. The hooks are easier to release if
done in sequence starting from the least accessible hook and ending on the nearest hook.
3. Remove the operator panel side covers (A).
Hooks
Hooks
A
A
Operator panel assembly