Lexmark X862de - Hardware Tests; Panel Test; Button Test

Diagnostic aids 3-7
7500-432, -632, and -832
Go Back
Previous
Next
Print Quality Pages Content by Report Page Number
HARDWARE TESTS
Touch the following Hardware Tests from this menu:
• Panel Test
• Button Test
• DRAM Test
• CACHE Test
Panel Test
This test automatically toggles all pixels on the display through every contrast level beginning with the darkest to
the brightest. This test shows non-functioning pixels as blank spaces during the darkest contrast.
This test continues until you press Stop , then the display returns to HARDWARE TESTS.
Button Test
The Button Test is used to verify the operation of each button on the operator panel.
To perform the Button Test:
1. Touch HARDWARE TESTS from the Diagnostics Menu.
2. Touch Button Test. A graphic of the operator panel buttons that matches the layout of the operator panel
buttons appears on the display.
3. Press any button on the operator panel and that button on the display appears shaded.
Page
Number
Content
1 General printer information includes:
• A circular graphic with spokes emanating from a dark center
• Device Information
• (Envelope Enhance)
• Engine Setting 1 to 16
• Edge to Edge
• Current values of each variable listed
• A repeated string of characters in varying font sizes
2 Page is gray with two black squares
3 Page is solid black
4 Page is blank (this page verifies that the device does not streak or smear toner)