Lexmark X862de - AC Power Input Socket Assembly Removal

4-124 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
AC power input socket assembly removal
1. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
2. Remove the rear motor cover. See “Rear motor cover removal” on page 4-11.
3. Remove the rear lower cover. See “Rear lower cover removal” on page 4-12.
4. Remove the top cover assembly. See “Top cover assembly removal” on page 4-5.
5. Remove the right upper cover. See “Right upper cover removal” on page 4-9.
6. Remove the three screws securing the AC power input socket assembly (A).
7. Release the harness from the clamp.
8. Remove the AC power bracket assembly (A).
Warning: Before reinstalling, ensure all connectors are plugged into their proper location to prevent
damage.
A
Rear