Lexmark X862de - 2000-Sheet Dual Input (TTM)-Pick Roll Idler Gear 33 Tooth Removal

4-272 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—pick roll idler gear 33 tooth removal
1. Remove the media tray assembly.
2. Remove the pick roll. See “2000-sheet dual input (TTM)—pick roll removal” on page 4-273.
3. Remove the pick roll drive gear 25 tooth. See “2000-sheet dual input (TTM)—pick roll drive gear 25
tooth removal” on page 4-274.
4. Remove the pick roll idler gear 33 tooth (A).
Front
A