Lexmark X862de - Sensor (Pick Roll Position HP) Removal

Repair information 4-185
7500-432, -632, and -832
Go Back
Previous
Next
Sensor (pick roll position HP) removal
1. Open the ADF left cover assembly.
2. Remove the ADF left cover media guide. See “ADF left cover media guide removal” on page 4-189.
3. Disconnect the connector from the sensor (pick roll position HP) (A).
4. Release the hooks securing sensor (pick roll position HP) (A) to the ADF left cover assembly (B).
5. Remove the sensor (pick roll position HP) (A).
B
A
Connector