Repair information 4-127
7500-432, -632, and -832
RIP card chassis bracket removal
1. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
2. Disconnect the seven connections from the RIP card assembly (A).
3. Remove the two screws securing the RIP card chassis bracket (B) to the frame.
4. Slide the RIP card chassis bracket (B) to the left and out of the frame.
Warning: Do not drop the RIP card chassis bracket, or damage will occur.
5. Remove the RIP card chassis bracket assembly.
To Next Page
Loading...
