Lexmark X862de - Printer Left Door Assembly Handle Removal

4-78 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Printer left door assembly handle removal
1. Open the printer left door assembly.
2. Remove the printer left door assembly. See “Printer left door assembly removal” on page 4-75.
3. Remove the transfer roll guide assembly. See “Transfer roll guide assembly removal” on page 4-77.
4. Remove five screws securing the metal frame (A) to the plastic cover (B).
5. Remove the metal frame (A) by lifting it upward and sliding outward.
6. Remove the three screws securing the handle cover (C).
7. Remove the handle cover (C).
8. Remove the printer left door assembly handle (D).
9. Remove the spring (E).
B
E
D
A
C