4-120 MFP Service Manual
7500-432, -632, and -832
LVPS card assembly removal
1. Remove the right upper cover. See “Right upper cover removal” on page 4-9.
2. Disconnect the connectors from the LVPS card assembly (A).
Note: The connectors P5, P521, P522, and P524 have hooks that must first be released.
3. Remove the nine screws securing the LVPS card assembly (A) to the printer.
4. Remove the LVPS card assembly (A).
Note: Grasp the card by the edge; avoid touching the bottom of the LVPS assembly (A).
P523
P522
P524
P521
P221
P5
F002
F401
To Next Page
Loading...
