Lexmark X862de - 2000-Sheet Dual Input (TTM)-Tray 3 Lift Gear Assembly Removal

4-278 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—tray 3 lift gear assembly removal
1. Remove the rear cover. See “2000-sheet dual input (TTM)—rear cover removal” on page 4-219.
2. Remove the media feed unit 3 assembly. See “2000-sheet dual input (TTM)—media feed unit
assembly removal (tray 3)” on page 4-250.
3. Release the harness from the clamp of the tray 3 lift gear assembly (A).
4. Remove two screws securing the tray 3 lift gear assembly (A).
5. Remove the tray 3 lift gear assembly (A).
Clamp
Clamp
A