Lexmark X862de - Sensor (Fuser Exit) Removal

Repair information 4-103
7500-432, -632, and -832
Go Back
Previous
Next
Sensor (fuser exit) removal
1. Open the printer left door assembly.
2. Remove the fuser unit. See “Fuser unit assembly removal” on page 4-104.
3. Disconnect the connector from the sensor (fuser exit) (A).
4. Remove the screw securing the bracket (B).
5. Remove the three hooks securing the sensor (fuser exit) (A) to the bracket (B).
6. Remove the sensor (fuser exit) (A).
Left
B
Hook
A