4-8 MFP Service Manual
7500-432, -632, and -832
Front inner cover removal
1. Remove the top cover assembly. See “Top cover assembly removal” on page 4-5.
2. Remove the printer front door assembly. See “Printer front door assembly removal” on page 4-6.
3. Remove the printer front left cover. See “Printer front left cover removal” on page 4-3.
4. Remove the PC cartridge.
5. Remove the three screws securing the front inner cover (A).
6. Remove the front inner cover (A).
Note: To reinstall the front inner cover (A), start with the four plastic hooks on the bottom of the front inner
cover.
To Next Page
Loading...
