Diagnostic aids 3-33
7500-432, -632, and -832
Configuration Menu
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold the 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Maintenance Count Value See “Maintenance Counter Value” on page 3-35.
Reset Maintenance Counter See “Reset Maintenance Counter” on page 3-35.
REGISTRATION See “REGISTRATION” on page 3-36.
Top Margin
Tray 1 Left Margin
Tray 2 Left Margin
Tray 3 Left Margin (if
installed)
Tray 4 Left Margin (if
installed)
Tray 5 Left Margin (if
installed)
Quick Test See “Quick Test” on page 3-37.
Print Quality Pages See “Print Quality Pages (Configuration Menu)” on page 3-38.
SIZE SENSING See “SIZE SENSING” on page 3-39.
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing (if installed)
Tray 4 Sensing (if installed)
Tray 5 Sensing (if installed)
Statement/A5 See “A5/Statement” on page 3-40.
Executive/B5 See “B5/Executive” on page 3-40.
Panel Menus See “Panel Menus” on page 3-40.
PPDS Emulation See “PPDS Emulation” on page 3-40.
Factory Defaults See “Energy Conserve” on page 3-41.
Energy Conserve See “Energy Conserve” on page 3-41.
Min Copy Memory See “Min Copy Memory” on page 3-41.
Format Fax Storage See “Format Fax Storage” on page 3-42.
EVENT LOG See “EVENT LOG (Configuration Menu)” on page 3-42.
ADF Edge Erase See “ADF Edge Erase” on page 3-42.
FB Edge Erase See “FB Edge Erase” on page 3-42.
Paper Prompts See “Paper Prompts” on page 3-44.
Envelope Prompts See “Envelope Prompts” on page 3-44.
Jobs On Disk See “Jobs On Disk” on page 3-44.
Disk Encryption See “Disk Encryption” on page 3-44.
To Next Page
Loading...
