Lexmark X862de - Sensor (RFID PC Cartridge) and Sensor (RFID Toner Cartridge) Removal

4-94 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Sensor (RFID PC cartridge) and sensor (RFID toner cartridge) removal
Note: This removal applies to the sensor (RFID PC cartridge) (A) and the sensor (RFID toner
cartridge) (B).
1. Remove the top cover assembly. See “Top cover assembly removal” on page 4-5.
2. Remove the toner cartridge guide assembly. See “Toner cartridge guide assembly removal” on
page 4-95.
3. Disconnect the connector from the sensor (RFID PC cartridge) (A) or the sensor (RFID toner cartridge) (B).
4. Release the hooks securing the sensor (RFID PC cartridge) (A) or the sensor (RFID toner cartridge) (B).
5. Remove the sensor (RFID PC cartridge) (A) or sensor (RFID toner cartridge) (B) by sliding it out in the
direction of the arrow.
Note: The sensor (RFID PC cartridge) (A) and sensor (RFID toner cartridge) (B) require moderate force to
remove.
Front
A
B