Lexmark X862de User Manual

2-160 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
923.00 Rear thermistor failure
924.00 Pressure roll thermistor failure
925.00 Fuser operating temperature failure
Step Check Yes No
1 Check the fuser unit assembly for proper installation.
Open the printer left door assembly, and check it.
Is the fuser unit assembly installed properly?
Go to step 2. Install the fuser
unit assembly
properly.
2 Check the fuser unit assembly connection.
Is the fuser unit assembly properly connected?
Replace the fuser
unit assembly.
Replace the
connection.
3 Perform a print test.
Does the error continue?
Replace the
printer engine card
assembly.
Go to “Printer
engine card
assembly
removal” on
page 4-119.
Problem solved.
Step Check Yes No
1 Check the fuser unit assembly for proper installation.
Open the printer left door assembly, and check it.
Is the fuser unit assembly installed properly?
Go to step 2. Install the fuser
unit assembly
properly.
2 Check the fuser unit assembly connection.
Is the fuser unit assembly properly connected?
Replace the fuser
unit assembly.
Replace the
connection.
3 Perform a print test.
Does the error continue?
Replace the
printer engine card
assembly.
Go to “Printer
engine card
assembly
removal” on
page 4-119.
Problem solved.
Step Check Yes No
1 Check the fuser unit assembly for a media jam.
Open the printer left door assembly, and check it.
Is there a media jam in the fuser unit assembly?
Go to the step 2. Remove the
media.
2 Leave the printer powered on with the error code displayed
for 10 minutes, then perform a POR.
Does the error still occur?
Go to step 3. Problem solved.

Lexmark X862de Specifications

General

Brand	Lexmark
Model	X862de
Category	All in One Printer
Language	English