Lexmark X862de - Exit 2 Unit Docking Lever Removal; Exit 2 Left Door Handle Removal

Repair information 4-323
7500-432, -632, and -832
Go Back
Previous
Next
Exit 2 unit docking lever removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-322.
2. Remove the two exit 2 unit docking levers (A) with a prying tool from the brackets (B).
Note: When removing the two exit 2 docking levers, ensure the brackets (B) are not bent or deformed.
3. Remove the springs (C) from the brackets (B).
Exit 2 left door handle removal
FRONT
REAR
ACB
A
C
B