Lexmark X862de - 2000-Sheet Dual Input (TTM)-Tray 3 Assembly Removal

4-224 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—tray 3 assembly removal
1. Remove the left cover. See “2000-sheet dual input (TTM)—left cover removal” on page 4-218.
2. Open the 2TM/TTM left door assembly.
3. Loosen the screw securing the tray 3 stopper (A).
4. Move the tray 3 stopper (A) outward in the direction of the arrow while pulling out the tray 3 assembly (B).
5. Remove the tray 3 assembly (B).
A
Front
B
Screw