Lexmark X862de - Transport Motor Failure

Diagnostic information 2-151
7500-432, -632, and -832
Go Back
Previous
Next
911.00 Transport motor failure
2 Check the dual drive motor assembly rotation operation.
Open the rear motor cover and check it.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Transport motor.
Does the motor rotate normally?
Go to step 4 Go to step 3.
3 Check the dual drive motor assembly connection.
Is the dual drive motor assembly properly connected?
Replace the dual
drive motor
assembly.
Go to “Dual drive
motor assembly
removal” on
page 4-114.
Replace the
connection.
4 Perform a print test.
Does the error continue?
Replace the
printer engine card
assembly.
Go to “Printer
engine card
assembly
removal” on
page 4-119.
Problem solved.
Step Check Yes No
1 Check the dual drive motor assembly for operation.
Open the rear motor cover and check it.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Transport motor.
Does the motor rotate normally?
Go to step 3 Go to step 2.
2 Check the dual drive motor assembly for proper installation.
Remove the rear motor cover and check it.
Is the dual drive motor assembly installed properly?
Go to step 3. Install the dual
drive motor
assembly
properly.
3 Check the rotation of the rotor in the dual drive motor
assembly.
Open the rear motor cover and check it.
Can the rotor be rotated by hand without excessive load?
Go to step 4. Install the dual
drive motor
assembly
properly.
4 Check the dual drive motor assembly connection.
Is the dual drive motor assembly properly connected?
Replace the dual
drive motor
assembly.
Go to “Dual drive
motor assembly
removal” on
page 4-114.
Replace the
connection.
Step Check Yes No