4-248 MFP Service Manual
7500-432, -632, and -832
2000-sheet dual input (TTM)—sensor (tray 4 feed-out) removal
1. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on
page 4-224.
2. Remove the tray 4 assembly. See “2000-sheet dual input (TTM)—tray 4 assembly removal” on
page 4-223.
3. Disconnect the connector from the sensor (tray 4 feed-out) (A).
4. Release the hooks securing the sensor (tray 4 feed-out) (A) to the upper guide (B).
5. Remove the sensor (tray 4 feed-out) (A).
To Next Page
Loading...
