Lexmark X862de - Diagnostics Menus

3-2 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Diagnostics Menus
Entering Diagnostics Menus
1. Turn off the printer.
2. Press and hold the 3 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available tests
Tests appear on the display in the order shown:
MOTOR TESTS
See “MOTOR TESTS” on page 3-5.
Finisher Motor Tests
Sub paddle solenoid
Media eject clutch
Stapler unit mtr
Bridge unit drv mtr
Motor (entrance/paddle)
Motor (buffer/transport)
Motor (exit)
Media eject clamp mtr
Media eject mtr
Punch unit mtr
Fin diverter solenoid
Fin Buffer solenoid
Punch carriage shift mtr
Front tamper mtr
Rear tamper mtr
Stapler carriage mtr
Stacker lift mtr
Printer Motor Tests
Transport mtr
2TM/TTM drv mtr
2TM/TTM Clutch
HCF transport mtr
HCF pick solenoid
MPF/Transport mtr
Fuser cooling fan
PC unit cooling fan
Toner add mtr
Drum unit
Registrat clutch