Lexmark X862de - Exit 2 Media Diverter Solenoid Removal

4-334 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Exit 2 media diverter solenoid removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-322.
2. Open the exit 2 unit assembly.
3. Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-325.
4. Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-327.
5. Disconnect the media diverter solenoid (A).
6. Release the harness from the clamp.
7. Remove the screw securing the media diverter solenoid (A) to the exit 2 unit assembly.
8. Remove the media diverter solenoid (A).
9. Move the media diverter link (B) toward the top of the exit 2 unit assembly in the direction of the arrow.
10. Remove the media diverter link (B) from the media diverter solenoid (A).
B
A
Connector
Front
Clamp