Lexmark X862de - RIP Card Assembly NVRAM Failure; Operator Panel Assembly NVRAM Failure; RIP Card Assembly NAND CRC Failure

2-170 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
951.XX RIP card assembly NVRAM failure
953.XX Operator panel assembly NVRAM failure
955.XX RIP card assembly NAND CRC failure
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
2 Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
Replace the RIP
card assembly.
Go to “RIP card
assembly
removal” on
page 4-130.
Go to step 3.
Problem solved.
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
2 Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
Replace the
operator panel
assembly.
Go to “Operator
panel assembly
removal” on
page 4-135.
Go to step 3.
Problem solved.
3 Perform a print test.
Does the error still occur?
Replace the RIP
card assembly.
Go to “RIP card
assembly
removal” on
page 4-130.
Go to step 4.
Problem solved.
Step Check Yes No
1 Perform a POR.
Does the error occur when the power is turned off/on?
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.