Lexmark X862de - Standard bin Full Exit 2 Actuator Removal

Repair information 4-329
7500-432, -632, and -832
Go Back
Previous
Next
Standard bin full exit 2 actuator removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-322.
2. Open the exit 2 unit assembly (A).
3. Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-325.
4. Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-327.
5. Remove the standard bin full exit 2 actuator outer (A) from the spring (B).
6. Release the hooks securing the standard bin full exit 2 actuator inner (C) to the right cover (D).
7. Release the spring (B) from the hook of the standard bin full exit 2 actuator inner (C).
D
Hook
C
B
Hook
Hook
D
A
Slot
Hook
Rear
Square hole