Lexmark X862de - 2000-Sheet Dual Input (TTM)-2 TM;TTM Controller Card Assembly Removal

Repair information 4-281
7500-432, -632, and -832
Go Back
Previous
Next
2000-sheet dual input (TTM)—2TM/TTM controller card assembly removal
1. Remove the rear cover. See “2000-sheet dual input (TTM)—rear cover removal” on page 4-219.
2. Disconnect all the connectors from the 2TM/TTM controller card assembly (A).
3. Remove four screws securing the 2TM/TTM controller card assembly (A).
4. Remove the controller card assembly (A).
A
B
2TM /TTM control card
P541
P548
P554
P552
P549
DIP
switch
On
1
23
4
DIP switch settings, TTM